Fri Jul 30, 2021 5:16 pm
#1862041
Hi all,
Just wanted to confirm if this would be correct for an overhead join, I see many examples of overhead joins inbound from the live side but none from the dead side. This is what I would normally do.
Blue indicates where I would overfly the airfield at 1,000ft above circuit height.
Red indicates where I would initiate my descent to circuit height.
Green indicates where I maintain circuit height and proceed with the normal landing procedure.
Thanks in advance!
Just wanted to confirm if this would be correct for an overhead join, I see many examples of overhead joins inbound from the live side but none from the dead side. This is what I would normally do.
Blue indicates where I would overfly the airfield at 1,000ft above circuit height.
Red indicates where I would initiate my descent to circuit height.
Green indicates where I maintain circuit height and proceed with the normal landing procedure.
Thanks in advance!