FLYER Forums

PostPosted:**Sat Jun 16, 2018 1:33 pm**

I am quoting a friend's query, as so far he has had no joy.

"VM 1000 has been installed in the Husky for 11 years with no problems.
Recently, the RPM indicator started to move back and forth for a time but subsequently sorted itself out - for a week or two - now I have no RPM indication at all.
Everything else works but the tacho side is stuck on "Engine operating hours" which do not update with the engine running.

Does anyone know anyone who can suggest a fix? My maintenance company have no real experience with this system."

Many thanks,

CC

PostPosted:**Sat Jun 16, 2018 3:17 pm**

Stick VM1000 in Google information available from JP instruments and others
Clive

PostPosted:**Sun Jun 17, 2018 11:05 am**

Tried that, thanks. Hoping for something this side of the pond, but continued googling suggests just searching for a good avionics person will be the answer.

PostPosted:**Mon Jun 18, 2018 4:18 pm**

ChampChump wrote:... searching for a good avionics person will be the answer.

Good luck with that :shock:

Rob P

PostPosted:**Mon Jun 18, 2018 5:23 pm**

Reggie Smith might be able to help you.
mooney37v@juno.com
Simon

PostPosted:**Mon Jun 18, 2018 5:32 pm**

https://vmsupport.weebly.com/

PostPosted:**Tue Jun 19, 2018 1:37 pm**

Many thanks. We had found that last link, but the other address will be passed on.

We've been recommended another, too, who might be able to help.

There should be a master plan in due course, I reckon - with no clockwork backup it Will Be Done. I have more faith than Rob :wink:

Thank you for the suggestions.

FLYER Forums

Vision microsystems problem

Vision microsystems problem

Re: Vision microsystems problem

Re: Vision microsystems problem

Re: Vision microsystems problem

Re: Vision microsystems problem

Re: Vision microsystems problem

Re: Vision microsystems problem