Primarily for general aviation discussion, but other aviation topics are also welcome.
By Tony
#1178889
Just to confirm what we need?

PowerFlarm display
Butterfly Connect-Interface-module
User avatar
By Peter Gristwood
#1178892
Rod1 wrote:There is quite a bit of kit that will connect to a std FLARM output including MGL kit and PFMS.

Rod1


.. and in English, this is?
By simon_gci
#1178895
SkyDemon and iPad/Android are developing into a multi purpose navigation tool, it would be nice to have a remote unit that would wirelessly/Bluetooth to ipad/android that would show traffic flarm/mode C etc, instead of having an existing unit with display that you use through another box then on to your SkyDemon, gets very messy.
User avatar
By Tim Dawson
#1178907
You can get a PowerFlarm without a display, and essentially just use SkyDemon as the display. It's called a PowerFlarm Core, and is obviously cheaper than the full PowerFlarm unit, but is meant for fixed installation in an airframe.

I believe we're looking at integrating with the Zaon hardware sometime in the next few months.
User avatar
By AlanB
#1178911
You know what I'd want, that is a box with 3 RS232 inputs on it which then creates a wifi network called AVIONICS or something. I could then plug my Zaon XRX, my PowerFlarm Core and my Levil AHRS unit into it, the ipad can then receive all of this via Wifi (or Bluetooth) and display the data on the brilliant SkyDemon.

PS Tim, while you are at it, any chance of creating a Gyro instrument window which you can bring up which can take the data from an external AHRS unit (like the Levil one) and display a real time attitude indicator based on gyro? Thanks ;)
User avatar
By flybymike
#1178970
And just to give you something to do Tim, can you make it a synthetic vision window as well.
User avatar
By carlmeek
#1178993
AlanB wrote:You know what I'd want, that is a box with 3 RS232 inputs on it which then creates a wifi network called AVIONICS or something. I could then plug my Zaon XRX, my PowerFlarm Core and my Levil AHRS unit into it, the ipad can then receive all of this via Wifi


Why would you want a xaon and a powerflarm, dont they do the same thing?
User avatar
By stevelup
#1178994
Not really, no.

The PowerFlarm can only give position information on other Flarm equipped aircraft and those with ADS-B Out (just about none at the moment)
User avatar
By carlmeek
#1178995
Their website says mode S and C supported?
User avatar
By G-BLEW
#1178996
From the website

For Mode-C / S transponder, the exact pressure altitude and distance is evaluated. The exact position cannot be evaluated.


So height and distance is given, direction isn't.

Ian
By Chiltern Aviator
#1179006
Better still would be if the people making Powerflarm could make it also make it display mode c transponding aircraft as a dot on the screen rather than a ring.


....or a solid black aircraft showing it has limited info?

Different to the coloured thingies anyway.